Other Services
Ming Stoneguard Film Protection
Prevent stone chips and winter sand pitting on your hood with virtually invisible protection. Ming Stoneguard Film Protection is a clear, thermoplastic urethane film made from 100% aliphatic resin. It's ability to resist yellowing, and offer the highest level of abrasion resistance is unparalleled in the industry.
Offering fantastic protection on all painted surfaces, ranging from motor vehicles, to RV's, motorcycles, boats and trucks, Ming's Stoneguard Film Protection is so strong that we offer it with a Lifetime Warranty! Ming's Stoneguard also provides chip and scuff protection around key locks, door handles and particularly door entry panels.
Popular Areas to Stoneguard:
- Hood, Fender, & Mirrors
- Headlights & Foglights
- Front Bumper
- Front Grill
- Door Sills & Pillars
- Rear Bumper Strip
- Rocker Panels
- Wheel Well Ridges
- and many more...
For more information on the benefits of Ming's Stoneguard Products click here.
Ming Windshield Repair New
Distracted by a rock chip?
Did you know that unsightly rock chip in your windshield can be repaired? If so, repairing a windshield instead of replacing it will save you hundreds of dollars.
Did you also know a small chip or crack that is ignored can spread across the entire length of the windshield over a period of time? Temperature changes in the windshield will cause it to expand and contract. When this happens, most small cracks progressively become larger.
In general, the sooner the repair is done, the better the results will be because less dirt, debris and moisture will have settled in to the chip. Smaller rock chips will turn out better than larger ones, as well as those with shorter cracks radiating out.
Our technician first drills into the rock chip, then injects a resin into the break. The resin used is optically compatible with glass. Once the resin is injected, the technician uses an ultraviolet light to cure it. He then scrapes any excess resin from the windshield and cleans the glass. The repair is now complete and the windshield is no longer in danger of cracking further.
After the repair, be prepared to see a blemish where the rock hit the windshield. Consider any improvement in the appearance a bonus. Most will look much better than before the repair as the windshield repair is meant as a “structural” repair than a cosmetic one.
Our trained technicians will use the upmost care, but windshields are made of glass so there is the slight possibility that the rock chip could crack further during the repair. As mentioned this possibility is remote, but feel comfortable knowing that we use only the best repair system and resins on your vehicle.
Ming Alloy Wheel Repair New
Get rid of those hideous marks on your wheel rims today! Ming Shine Co. can now cosmetically repair scuffs, scrapes and gouges to your Alloy Wheels. The damaged wheel will undergo strict inpsections for bending/cracking. The repair process includes re-surfacing, re-priming, re-painting and clear coating. Paint color is matched for all foreign and domestic cars, using only the highest quality paint products as that of the manufacturer. All of our repairs are 100% Guaranteed! Restore your Alloy Wheels to like-new condition today!
ENVIRONMENTAL FALLOUT & OVERSPRAY & ROAD PAINT REMOVAL
Industrial Paint Overspray
Industrial Paint Overspray occurs when airborne particles from painting projects adhere to personal property located in the general vicinity of a structure being painted. This could be the result of paint being sprayed, rolled or even brushed where particles are carried in the prevailing wind.
This category includes paint types such as epoxies, polyurethanes, alkyds, coal tar epoxy, polyurea, powder coatings, masonry waterproofing, and any type of industrial coating. Ming Shine Co. specializes in the removal of these contaminant materials. If properly removed, industrial overspray will not harm clear coat finishes or void any existing manufacturer's warranty.
Chemical Emmissions
Plant and refinery operations create many types of emissions which can adhere to a wide variety of surfaces including vehicles and buildings throughout the neighboring community. The public relations process can become a nightmare for self insured entities such as refineries and large manufacturing facilities. Our administrative team is capable of ensuring that a company maintains its good standing in the local community.
Types of chemical emissions include: petro chemical by-products, post stack combustion, fly ash and coke. If not removed quickly using the proper method, chemical emissions can cause permanent surface damage. Ming Shine Co. strongly suggests removing these contaminant materials as soon as possible in order to obtain the best results.
Iron Oxides
Iron oxides also referred to as "rail head dust" or "ferric oxide" consists of tiny metallic particles that adhere to vehicle surfaces. This type of overspray damage occurs in industrial environments adjacent to factories, and railroads along with sandblasting and mining operations. Without proper removal, this contaminant's abrasive nature can cause extensive scratching to a vehicle's finish. Furthermore, if not removed in a timely manner, "rail dust" will cause permanent rust stains.
Sandblasting operations produce "spent abrasive" material which can be removed using our hand polishing procedures. The processes used for iron oxide removal, will neutralize any threat of rust penetration and restore the vehicle's finish to its original state.
Acid Rain/Caustic Stains
Industrial pollutants and emissions drift into the atmosphere and combine with rain or snow to form acids. These diluted acids settle on a vehicle's surface and when the water evaporates, the remaining acid becomes more concentrated and will cause damage to the surface creating slight depressions or craters. These imperfections are commonly referred to as "water spots", "water stains", and "acid rain etching".
This category also includes mineral deposits / cement, salt, calcium, and lime deposits. Ming Shine Co. recommends immediate removal to increase the probability of a full surface restoration. If left untreated, acid rain will cause permanent surface damage. Don't believe it when someone informs you that these damages cannot be corrected. We have processed hundreds if not thousands of units successfully for manufacturers and dealers along with individual vehicle owners.
Road Spray/Tar/Oil
Roadspray consisting of asphalt, tar, oil, paint striping and coatings are common resurfacing materials used on our nation's roads. When a vehicle is traveling on newly resurfaced roads, these contaminate materials "splash up" predominantly on the lower or "rocker panel" of a vehicle causing roadspray.
Roofing materials such as tar, oil, and polyurethane foam can also be successfully removed from a vehicle's surface. These road paint removal and roadspray claims are very similar and commonly treated in the same manner as paint overspray restoration.
After the transaction is complete, let Ming get your new vehicle into top condition with an Appearance Reconditioning package. Ming Shine Co. will get the vehicle in tip top shape with:
- Ming Shine Paint Reconditioning
- Interior Steam Clean & Detail
- Engine Shampoo
- Decal Removal
- Sprayless Scratch Repair
- Paintless Dent Repair
- Light Auto Body Repair
- Interior Repair
SELLING YOUR VEHICLE
Your investment in a little car maintenance and cleanup can reap big dividends when selling a car. Some cosmetic changes can make the difference in making a great first impression on potential car buyers, and can vastly improve your chances of getting your asking price. Many services will enhance the appeal of your vehicle include:
- Ming Power Polish
- Interior Steam Clean & Detail
- Engine Shampoo
- Decal Removal
- Sprayless Scratch Repair
- Paintless Dent Repair
- Light Auto Body Repair
- Interior Repair
So before you sell it Ming It!
INTERIOR DETAILING
An interior cleaning requires more than soap and water - it requires trained personnel and expert knowledge of today's automotive fabrics, leather, carpet and interior components. Prior to any cleaning it is necessary to identify fabric composition, its age, severity of stains and the overall condition of the interior. This information allows the technician to choose the best method, or methods, that will clean the interior correctly.
The actual cleaning process begins with the technician removing the floormats, blowing out the cracks, crevices and seams, vacuuming the carpets and seats for dirt and dust and spot cleaning heavier stains. This prepping stage is very important to achieving a clean interior and should not be overlooked. The second cleaning stage involves our NEW dry-vapour steam technique.
The advantages to uses steam:
- No more soaking wet interiors
- Kill unwanted Bacteria
- Serious Reduction in Chemical Usage
- No more strong Shampoo Odours
- Clean small areas that are out of reach
While most professional detailing shops have adopted the use of carpet extractors over the "old school" bucket-and-brush method, many detailers are still leaving your interior soaking wet and smelling of cheap shampoos when you pick up your vehicle.
Not at Ming Shine Co.! We now use a DRY-VAPOUR STEAM system that allows us to effectively clean your interior without leaving your interior wet, killing bacteria, reducing chemical use, eliminating shampoo odours, and we get at those hard-to-reach places.
WHAT DOES STEAM DO?
All steamers have a boiler. The water inside the boiler is heated and pressurized which will produce steam - or more precisely, hot dry vapour, which is a gas. As all gasses do, when vapor contacts the atmosphere it expands violently and dissipates.
Vapor molecules are extremely small and are able to penetrate the pores on any surface. When the hot vapor molecules come in contact with the cool surface in the pores, they violently expand and force all dirt, debris, and bacteria to the surface. Also, because the vapor is so hot, bacteria - as well as anything else - are killed. The results are surfaces that are free of any substances that were not originally on those surfaces.
In addition, the surface dries extremely quickly because you are cleaning with hot vapor, which has a water content of only about 5 percent. When we use steam on the interior of a vehicle, the overall interior will be almost totally dry when you pick it up!
OUR CUSTOMERS LOVE IT!
Our DRY-VAPOUR STEAM system safely cleans surfaces without damaging leather, plastic trim, fabrics, etc. The steamer is not only safe but very effective. It was also very quick in eliminating some stains and grease, and in cleaning tight areas.
Ming Shine Co. has nearly eliminated our commercial grade cleaners while mostly using just steam. Doing so prevents the creation of chemical residues, which can attract more dirt. The result is a surface that looks brighter and is actually cleaner! The absence of chemicals, and some harsh odors they leave behind, helps satisfy clients who may be very sensitive to chemical smells, as well as promoting a more environmentally-friendly process.
Instrument Detailing is the final stage of an interior cleaning. Using special tools and products, your interior components are wiped down to give a new car look and shine to the interior. Gathering any personal belongings and cleaning the windows completes the interior cleaning process.
MING CAR MAINTENANCE
Car Wash Exterior
Vacuum/Wipe
Steam Clean Seats
Steam Clean Carpet
Spot Removal
One Seat/One Carpet Area
Please call for pricing |
 |
|
