|
|
|
|
Sprayless Scratch Repair. The SSR Process
The Sprayless Scratch Repair process is straightforward & quite easy to pick up
1. First we must prepare the repair.
Clean the area thoroughly, remove any dirt from the bottom of the scratches and chips and wipe the area with a panel wipe to ensure there is no wax, glaze or polish left in the scratches that will prevent the paint from holding.
2. Applying the Paint.
The paint should be applied by hand with the index finger. Rub paint into the scratch using a circular / spiral motion to force the paint to the bottom of the scratch or chip.
3. Applying the Polish.
Apply polish generously, directly to the paint product and buff with a high quality wool pad.
4. Deeper Scratches.
Some scratches will require more than one application. The wider and deeper, the more times you will have to apply the paint.
5. Cleaning Up.
Once you have completed the repair, wipe down the vehicle all over to remove polish that may have slung over and around the surface of the vehicle. Check the windscreen mouldings and wiper blades for splatter and you're done!.
All this in just a matter of minutes
The Alternatives.
SSR is not your only option, but we think its your best
Flat & Polish
The traditional way to remove minor scratches. First of all, ?flat? the scratch with 2000 wet and dry. Then buff with an abrasive such as G3 polish.
It works, but exceptional care must be taken so as not to ?cut through? the clear coat. If you do, then what was a $50.00 to $70.00 profit turns into a $300.00 loss as the panel will now require refinishing.
Using a touch up brush
It's cheap, but you simply cannot control the flow of paint and are often left with an ugly scar. Alternatively you could apply the paint using a dart or pencil but the result is not much better.
Specialist Touch-Up
If you know what you are doing you can play around with custom mixtures of paint and lacquer, apply them to the scratch or chip, allow it to harden and flat polish.
This is a decent alternative if the scratch or chip is a not too large, but it can take 1 to 1 1/2 hours per chip and is only suitable for a small number of chips (2 or 3). Any more than that and you can end with a vehicle that looks like it has spots, then the only option is to refinish.
Special Spray-On Formulas
These techniques are generally referred to as SMART repairs, spraying anything onto vehicles requires great skill to obtain a satisfactory result.
Another downside is that it takes a lot longer and the paint needs to be colour matched exactly with the existing finish.
As with any spraying out with a spray booth, Health & Safety issues must be addressed, not to mention the elements such as wind and rain.
Now try any of these techniques with a complete bonnet - no chance! The only alternative in this situation is to refinish. Unless of course you use SSR.
Click for more Information Or call our head office at 780.425.1235. back to top
Back to SSR Main Page
Feedback from Sprayless Scratch Repair Users.
"I started this business two and a half years ago. Today I have six vans on the road, all operated by women! We start work at around 8:30 in the morning and we're all finished before 2pm. I love it "
"When I first heard about Sprayless Scratch Repair I thought, oh yes here we go again. Not anymore! The first port of call for every vehicle I buy is straight to the Sprayless Scratch Repair workshop. The difference Sprayless Scratch Repair makes to a vehicle in such a short time is nothing short of amazing. I'd recommend it to anyone looking to sell a car."
"I gave up a high flying corporate role to be my own boss and for this, Sprayless Scratch Repair was ideal. Earnings are extremely good and the work is easy and satisfying to do. My best careers move to date"
"Having been a car dealer for many years I came across Sprayless Scratch Repair and immediately saw the benefits to other car dealers. Thanks to Sprayless Scratch Repair I can pass this benefit on to other car dealers and earn good money to boot!"
"Since using Sprayless Scratch Repair Paint products I can honestly say that my initial
investment was recouped within the first 4 weeks of operation. My turnover is
increasing month by month thanks to the revolutionary way in which the
system works. The Staff at Head Office are also polite and professional
in every aspect and I would have no hesitation in recommending this
opportunity to others looking to break free from the 9 to 5 or supplement their
existing business."
"Sprayless Scratch Repair does everything it says on the tin, I am now my own boss, work the
hours I want, have more time with my family, and make more money than I
used too. and I have very happy customers who are saving money."
|
|
|
|
| | Copyright © 2007, MingShine. All Rights Reserved. |
|
|